Scratch-resistant agentA new upgraded scratch-resistant agent, selected ultra-high molecular weight siloxane resin by twin-screw high-temperature shear after granulation, compared with ordinary scratch-resistant agent, easy to disperse, there is no wh…
A new upgraded scratch-resistant agent, selected ultra-high molecular weight siloxane resin by twin-screw high-temperature shear after granulation, compared with ordinary scratch-resistant agent, easy to disperse, there is no white spots, not plasticized phenomenon, the product has better quality, it can make the material has better fluidity, demolding performance and better surface scratch resistance, while the impact on the mechanical properties of the material is smaller.
It can significantly reduce the problem of sticky film in the process of shoe material release, and also can eliminate the air bubbles on the surface of the shoe material, which can greatly improve the finished product rate in processing.
It can significantly improve the fluidity of shoe sole processing, help mineral filler dispersion, reduce torque, reduce processing viscosity, reduce equipment wear, and reduce the defective rate of products.
It can significantly reduce the coefficient of friction, improve the slippery performance, improve the surface gloss, enhance the surface silky touch, and improve the scratch and abrasion resistance.
It can obviously improve the performance of shoe soles, reduce smoke density, improve the impact strength of materials and surface gloss.
It can obviously improve the surface smoothness and does not affect the surface bonding of products. It has good stability and non-migration.
Generally used as material processing auxiliary and material surface improvement function, the product can be directly molded or granulated after mixing with its compatible raw materials in a certain ratio.
Recommended addition amount
When the addition amount is 0.5%-2%, it can improve the processability, fluidity and demolding of the products; when the addition amount is 1%-2%, it can improve the surface scratch resistance of the products.
The product is packed in paper-plastic composite bag, net weight 25kg per bag.）
Wire and cable silicone additive
Compared with common silicone additives, it is easy to disperse and does not have white spots or plasticization, and has better quality.
1. Reduce screw torque, extend the service life of processing equipment, reduce processing energy consumption and improve production efficiency.
2. Improve the processing fluidity of cable material, accelerate the extrusion speed and improve the mechanical strength of the cable.
3. Has good internal and external lubrication, can effectively reduce the extruded products die mouth material accumulation.
4. It will not migrate and is more stable than traditional processing aids and lubricants, and can improve the scratch resistance and surface finish of products.
1. It can be added to twin-screw extruder together with other materials in proportion to the full pre-mixing, in which it is melted and mixed and pelletized.
2. It can also be added to the single-screw injection molding machine/extruder directly after mixing with plastic particles in the production process, in which it is melt mixed and then injection/extrusion molding.
Recommended addition amount
When the addition amount is 0.5%-0.2%, it improves the process ability, fluidity and demold ability of the products; when the addition amount is 1.0%-5.0%, it improves the surface properties of the products (smoothness, finish, scratch resistance, abrasion resistance, etc.