It is a new upgraded abrasion resistant agent, which is made of ultra-high molecular weight siloxane resin granulated by twin-screw high temperature shearing. Compared with ordinary abrasion resistant agent, it is easy to disperse, there is no white s…
It is a new upgraded abrasion resistant agent, which is made of ultra-high molecular weight siloxane resin granulated by twin-screw high temperature shearing. Compared with ordinary abrasion resistant agent, it is easy to disperse, there is no white spot, no plasticization phenomenon, and the product has better quality, it can make the material have better fluidity, demoulding performance and better apparent smoothness, and at the same time, it has less influence on the mechanical properties of the material.
It can significantly reduce the problem of sticky film in the process of shoe material release, and also can eliminate the air bubbles on the surface of the shoe material, which can greatly improve the finished product rate in processing.
It can significantly improve the fluidity of shoe sole processing, help mineral filler dispersion, reduce torque, reduce processing viscosity, reduce equipment wear, and reduce the defective rate of products.
It can significantly reduce the coefficient of friction, improve the slippery performance, improve the surface gloss, enhance the surface silky touch, and improve the scratch and abrasion resistance.
It can significantly improve the performance of shoe soles, reduce smoke density, improve the impact strength of materials and surface gloss.
It can obviously improve the surface smoothness and does not affect the surface bonding of products. It has good stability and non-migration.
Widely used in PVC pipe, PVC film, PVC leather, PVC shoe sole, PVC door and window seal, wire/cable material, automobile dashboard, rubber roller, automobile bumper, plastic film, irrigation hoses, mining conveyor belt heart, shoe industry, brake pad industry, etc. It is generally used as processing auxiliary for shoe sole material and surface improvement function of shoe sole material. It can be directly molded or granulated after mixing the product with its compatible raw materials in a certain ratio.
Recommended addition amount
When the addition amount is 1%-2%, it can improve the processability, fluidity and mold release of the products; when the addition amount is 2%-4%, it can improve the surface performance of the products (smoothness, smoothness, scratch resistance, abrasion resistance, etc.). When added 4-5% for wear resistance, the abrasion can be reduced by 30-80%.
This product is packed in paper-plastic composite bag, net weight 25kg per bag.